Aquaponics Calculations

Need to know how many square feet that 5 gallon bucket holds, or how many square feet that 55 gallon barrel lid holds?

{ 0 comments }

Knowing how much water your tanks hold is very important in aquaponics. Here is the formula for calculating water volume in a cylinder tank.

{ 0 comments }

For most people, they just buy a pump that matches their pumping requirements and go from there. There is no need to calculate how many watts, Amp Hours, or other information about the pump. < br/> Airlifts use much less power! For small systems, a small pump is probably much easier. However, when you need […]

{ 1 comment }

People all over the world are learning about, experimenting with and building aquaponics systems. I’ve read articles that were listed as inches and millimeters for pipe fittings. This is probably a good conversion to have available.

{ 0 comments }

People all over the world are learning about, experimenting with and building aquaponics systems. I’ve read articles that were listed as liters and as gallons. This is probably a good converter to have available.

{ 0 comments }

Knowing how much water your tanks hold is very important in aquaponics. Here are the formulas for calculating water volume in a rectangle grow beds.

{ 0 comments }

How much does your aquaponics system cost to operate? We can figure out the basic electricity costs by using the following simple formula:

{ 0 comments }

You will often need to know how much an aquaponics sump, timer, air pump or other device uses to plan for backup power such as solar, battery, generators etc. This formula shows you how:

{ 0 comments }